0 items - $0.00 0
  • Empty cart!

Mower Blades 101: 7 Best Tips To Keep Your Mower Blades Sharp & Efficient

Lawn mowers are probably the best fit for every person with OCD who can’t sleep at night if the weeds or brushes grow taller than microscopic level. This is why, healthy mower blades are not just a matter of choice but a necessity . However, as the usage increases, blades sharp ends lose their charm and become blunt after a few runs. Blunt knives are not only inefficient but consume more fuel in multiple tractor runs for the desired result.

How would you know when you must change the mower blades?

At times, it is difficult to tell whether you need to inspect mower blades at all. You might have bought a new set of knives or a new equipment but there’s still a chance that it’s not working as it should. These are 3 signs that say it’s time to change your mower blades. Want to know? Read on!

Uneven Height Of Grass That’s Cut

You need to cut the grass at an even height so that it retains the lush green color and the texture maintains its richness. The cut made by sharp blades is quite straight and doesn’t need more than one mower run. However, you’ll notice that the grass that’s shortened using a blunt blade will have uneven tip which deteriorates whole lawn. So, if you are left with uneven height of grass, sharpen the blades.

Check The Thickness Of The Blades

During the regular use of the blades for lawn cleaning and maintenance, soil, water and chemical contact leads to erosion of steel and accumulation of debris on the surface. This prompts the user to keep it polished. During the sharpening process, the blade gets its edge back but significant loss of metal occurs on continuous sharpening. Check the thickness of blades and avoid fatal accidents such as sudden breakdown that could further harm the machine.

Ensure The Surface For Bents, Dents and Chips

Physical distortion can occur if you are not serious in handling the machine. Hitting a hard surface while low grass mowing or attacking thick grass without properly setting up the angle of cut. In case, you have a faulty mower, it’s time for the change.

With these tips, you’ll be able to make a fair decision when you should buy a new set of blades or repair the existing ones. But is it enough? Shouldn’t you know how you can utilize the machine so that there is no need to invest in blades insanely?

Here’s how you can do it!

Grass Type

There are varieties of grasses that need to be trimmed but due to their different plant structure their height should be monitored. For not chopping off the grass part that contains healthy photosynthesis cells, one has to gain the knowledge of which type of grass they are working on.

For example:

Bahia Grass- 2” – 3”
Bentgrass- 1/4” – 3/4”
Fine Fescue- 1 1/2” – 2 1/2”
Tall Fescue- 2” – 3”
St. Augustine- 2” – 4”

Grass Height

Chopping off the grass all at once is not only bad for health of the grass but also for the mower blade. That’s because the higher the impact, the larger the damages. As a golden rule, it is advised to mow 1/3rd of the grass height at one run. If you’ve wildly growing strands in your lawn then wait for 3-4 days after one run of mower and then cut the 1/3rd again. These consecutive runs will allow the grass to heal & sustain the trimming and won’t left the ground go dry.

Season

Grasses are not always sucking good nutrients out of the soil. During summer, they protect the soil from running dry. It’s said, taller grass helps to retain moisture and water deep into the ground due to its longer roots. Therefore, your mower blades should be placed higher during the summers. However, springtime is about new saplings and sunlight must reach ground for them. Hence, lower mower height is expected.

How Often Should You Mow?

Coming to the final quest, there’s basically no science to prove how often you must wear your farmer pants and run down the field with this machine but there’s a decision you must make – what’s the height you desire. Lower the height of your grass, more you’ll have to imply your time to keep it that much. Taller grasses, lesser time you’ll need to mow.

Final Note!

From the mower blade to the height of your grass, everything is well connected. Take care of one aspect and the rest will fall in place. If you’re in search of long-lasting and great stress bearing implements, then we can be your trusted partner. Check out our exclusive range of Mowers!

Leave a Reply

Your email address will not be published. Required fields are marked *

Translate »