(7 customer reviews)

EMHD-86 Heavy Duty Embankment Flail Mower

Heavy Duty Embankment Mower, Mowing Width 86″, Minimum Tractor Performance 65HP

PTO Shaft IncludedFree Shipping | 2-yr Warranty

Product Size

EMHD-64 | EMHD-70 | EMHD-78 | EMHD-86

Get notified when product is in stock


Victory 2023 Flail Mower Buyer’s Guide

EMHD-86 Heavy Duty Embankment Flail Mower for your Mid-Sized to larger Tractors

Our heavy-duty embankment mower is designed to provide professional cutting of all kinds of vegetation such as grass and undergrowth on slopes, embankments, and ditches, as well as trees and hedges.   

The EMHD-86 with a working width of 86″ connects to your tractor by a CAT II 3-point hitch. Your tractor should have a PTO performance of at least 65 HP. The PTO shaft speed needs to be 540RPM.

Featuring rugged construction, an extra heavy-duty gearbox, a spiral flail shaft, and a hinged rear gate.

NOTE: Requires rear hydraulic remotes on your tractor (Hose ends that connect to the tractor are fitted with 1/2-14 NPTF quick connect fittings).

The hydraulic swivel arm allows mowing in almost any position. It also saves maneuvering in narrow corners when used as a regular flail mower.  Your tractor needs 2 double-acting hydraulic control circuits in order to fully operate the swivel arm.

Materials and workmanship are of the highest quality. Therefore, your purchase includes a 2 years warranty and shipping is free to your location. (lower 48 States).

See the EMHD Series Embankment Flail Mower in action:

EMHD’s are available in Working Width of 64″, 70″, 78″, & 86″

Check out our blog post Everything You Need to Know About Buying a Flail Mower Online to decide if the EMHD-86 is right for you.


The spiral rotor shaft with staggered flails achieves a superior cutting result. The electronically balanced shaft reduces vibration, provides for smooth running, and reduces the wear on the bearings.

The hinged rear gate allows for easier cleaning, flail replacement, and general maintenance. The closed gate provides for additional mulching and the open gate allows for easier disposal of the mowed material.

While the tractor’s PTO speed should be 540 RPM, the mower turns at 2,150 RPM.  The mower operates from a -55 degree angle (ditches) to a maximum of +90 degrees (hedges). Maximum extension measured from the center of your tractor to the right edge of the mower is 134″!


The gearbox allows the mower to turn independently once the PTO (tractor) stops moving.  The front of the mower has a protection guard to prevent material to be thrown out.  The heavy-duty construction of the mower box provides for added protection.  The mower has replaceable counter blades to minimize clogging.


Partially assembled machines do not contain any fuel, oil or other fluids or grease needed for operation! BEFORE USING THE MACHINE please carefully read the user manual.

Call Victory Tractor at (562) 534-8182 to place your order today!


Frequently Bought Together…

You May Also Like…

Victory Tractor Implements

Proud supporters of the FFA

     Tractor HP50 – 85 HP55 – 85 HP60 -100 HP65 – 100 HP
     Working Width64 inches70 inches78 inches86 inches
     Total Weight1,385 lb.1,450 lb.1,520 lb.1,630 lb.
     PTO Shaft Length65 in.65 in.65 in.65 in.
     PTO Speed540 RPM540 RPM540 RPM540 RPM
     Drive System4 Belts4 Belts4 Belts4 Belts
     Flail Shaft Speed2,150 RPM2,150 RPM2,150 RPM2,150 RPM
     Nbr. Of Flails14161820
     Flails (forged steel)1,200 grams1,200 grams1,200 grams1,200 grams
     Working Efficiency350 cu.ft./Hr.450 cu.ft./Hr.525 cu.ft./Hr.600 cu.ft./Hr.
     Dim’s.(WxHxD)74x56x30 in.82x56x30 in.90x56x30 in.98x56x30 in.
     Material Top4 mm4 mm4 mm4 mm
     Side Walls6 mm6 mm6 mm6 mm
     Paint (Green/Yellow)Powder Coat.Powder Coat.Powder Coat.Powder Coat.
     Shipping Box82x40x32 in.90x40x32 in.98x40x32 in.105x40x32 in.
     Maximum Extens.
     Behind the Tractor76 in.76 in.76 in.76 in.
     Middle of Tractor110 in.118 in.126 in.134 in.
     Vertical Extension75 in.75 in.75 in.75 in.
     Length of hydraulic70/80/120/13070/80/120/13070/80/120/13070/80/120/130
     Slope of mowing-55 to 90 deg.-55 to 90 deg.-55 to 90 deg.-55 to 90 deg.

7 reviews for EMHD-86 Heavy Duty Embankment Flail Mower

  1. Travis Wilson

    I bought the EMHD-86 and put it on my 75A Case/IH. I was not expecting the greatest mower given the price and knowing it was from China. Boy was I wrong!!! This unit is built very strong and rugged. Coming from a pipeliner, that is saying something! It is a beast!! First time out was 3 foot high hay/weeds and it mulched it effortlessly. The only gripe I have is it needs to be offered in red and silver!! Lol

  2. Jackson D

    Great mower at a great price!

  3. Willy

    Great mower. Had a small issue with a hydraulic leak on the tilt cylinder. One call to them and I had a replacement cylinder in a few days! Thanks for the great service!

  4. Keith

    The EMHD-86 is an excellent mower and a bargain for the price. We have used it to mow the banks of creeks, lakes, and ditches. In the vertical position, we have used it to trim tree limbs to make ATV trails in the woods. It performed well in both applications.

  5. Robert Meserve

    Mower was well built. A couple of the grease fittings were missing and the holes in the pto shield didn’t line up with the holes in the gearbox. Both easy fixes

  6. greg

    Pretty good mower for that price,cuts up a lot of stuff, heavy blades need to sharpen already but took a lot of abuse .tighten bolts,victory implements was good to deal with

  7. Lou Marchaland

    I gave this mower 5 stars. The mower seems to be well built.
    I was disappointed with the quality of a half a dozen of the grease zerks, they were miss-shapened and would not take grease and had to be replaced. Other then that the assembly went good. The parking stands needed a bit of modification, the circular plate on the bottom of them would not clear the frames to allow them to be pined in the bottom holes, a quick touch with a grinder and they are fine. Also at this price I can see why it wasn’t included but this mover should have a CV joint on the pto shaft. Also this long pto shaft did not have any grease zerks on the tubings.

Add a review

Your email address will not be published. Required fields are marked *

EMHD Series User Manual (opens in a new tab)

Additional information

Weight1450 kg
Dimensions86 × 56 × 40 cm
Lift Gate Needed

No, No Liftgate

Notify me when product is in stock