Maximize your wood processing with the BX42S PTO Wood Chipper, suitable for 18-50HP tractors. This efficient chipper shreds wood up to 5 inches in diameter with a direct PTO drive and a balanced 110 lb. rotor, equipped with four hardened steel knives.
Features an adjustable discharge funnel, ejecting material up to 20 feet, and boasts a capacity of 200-250 cu.ft./hr. Engineered for ease of use and safety, the BX42S combines powerful performance with simple maintenance, perfect for seamless wood processing tasks.
The upgraded BX42 model from Victory Tractor Implements is designed to efficiently shred wood up to 5″ in diameter, featuring enhanced suction for improved performance.
This powerful yet manageable chipper connects seamlessly to your CAT I 3-Point Hitch and includes a PTO shaft with a shear bolt for safety and reliability.
Optimized for tractors with 25 – 35 HP and a PTO shaft speed of 540 RPM, the BX42S boasts a direct PTO drive system that powers a well-balanced 110 lb. rotor.
The rotor is equipped with four 8″ knives crafted from hardened tooling steel, ensuring rapid and consistent wood cutting at about 9 times per second.
The design produces centrifugal force for material intake, with counter knife settings allowing for shredded material sizes ranging from ¾ in. to 1 ½ in. The rotor’s speed and winglets are engineered to create effective air suction, reducing the chance of wood jams.
The BX42S is compatible with a wide range of tractors, requiring a minimum of 18 horsepower and supporting up to 45 horsepower.
PTO Shaft
Equipped with a 1-3/8” 6-spline PTO shaft designed for Category 1 tractor connections. The included universal PTO shaft with shear bolt offers compatibility with various tractor brands and models.
Cutter
At the core of the BX42S Wood Chipper is a disc cutter, which is simple to disassemble, making blade replacements quick and easy.
3 Point Hitch
The three-point hitch connection provides stability for the chipper, helping it remain secure when attached to the tractor. This design enhances grinding efficiency and reduces operating time.
Maximum Wood Chip Diameter 5’’
The BX42S is capable of handling branches up to 5 inches in diameter, delivering powerful cutting performance to make chipping easier.
Discharge Chute
The discharge chute can rotate a full 360 degrees, allowing for versatile positioning. It’s also designed for easy disassembly, streamlining blade replacement.
Two-Year Warranty
The BX42S 5″ PTO Wood Chipper (SKU: VTI-BX42S) has been rigorously tested to withstand tough conditions and includes a two-year warranty on the machine. Learn More
After some initial setup issues I am very pleased with the chipper so far. The unit would not fit my Kubota BX2360 3 point hitch. The turnbuckles on the 3 point hit the chipper frame before the bottom pins lined up. I ended up buying a quick hitch and large pins (for $150) and that solved the issue. The chipper was well adjusted and worked fine from the start. Instructions on shortening the drive shaft could be better. The unit did not come with any kind of name plate or serial number. I would recommend it for hpmeowners.
At this point I’ve only used it enough to make sure everything works and the shoot knife was properly adjusted. Had a mods to make so I wouldn’t have to adjust my quick hitch between implements. Wasn’t real sure how well the BX42 would work on a JD1025 but so far it handled it. I like the skid style built in stand makes for a really solid design but also cuts down on ground clearance. That’s an issue for sub compact tractors. With the 3 point all the way up and the aid of the quick hitch it just cleared 12” and that’s enough to get through a small wash and up a hill with just a little bottoming out. The tall stand also keeps the drive shaft at a little more of an angle than I would like but would likely be great for a larger tractor. Another thing I liked but was worried about was the 4 knives. I have a lot of dead ash. It’s a pretty hard wood and wasn’t sure if the 4 knives would be too much contact for the small tractor. Worst case I was going to remove 2 knives. Wasn’t a problem with a couple of 4” dry ash branches I ran through it. So far all good, simple and solid piece of equipment. The reason for only 4 stars; all the torque specs should’ve been met at the factory. The biggest problem is the only on line manual didn’t even have all the proper sizes listed. Like the ones for the knives and the bearings you know the only ones that matter and pretty much the only ones it has. All yeah both zerk fitting have flat spots on the side and just made a mess with very little grease getting to the bearings so I replaced them.
Overall this is a good machine. But I had to work through several issues to get it into production. Hence why I’m giving this 4, not 5 stars. First, the lower attachments for the 3 point hitch were loose, not properly torqued. Not a big deal, but annoying. Second, the fixed cutter was not properly adjusted to spec. When first placed into service, I had a LOT of jams. Fortunately, I found a comment in another review that led me to the fixed cutter adjustment as the problem. This should have been adjusted at the factory. But once done, the clogging problem was solved. Third, the flywheel cover didn’t fit properly – it was forced closed and took a pry bar and hammer to get open. Which I had to do quite often at the beginning to clear clogs (see previous comment). With some prying and hammering I was able to loosen it up some, but it is still very tight. I can live with it since now that the clog problem is mostly gone I don’t have to open it up very often. Lastly, a minor issue, there was some bending near the discharge rotator. Might have been from shipping, but since the machine comes in a steel cage, and I didn’t see any damage to the paint, I suspect it was bent at the factory. So my net assessment is that there are some quality control issues, but nothing that can’t be worked around. Once adjusted and in production, I have been quite happy with the capacity and performance.
Partially assembled machines do not contain any fuel, oil, or other fluids or grease needed for operation! BEFORE USING THE MACHINE please carefully read the user’s manual.
At Victory Tractor Implements, your confidence in our products is paramount. That's why we offer a 30-Day Return Policy designed to give you peace of mind with every purchase.
If you find that you need to return an item, simply notify us within 30 days of delivery. As long as the product is unused and in its original, unopened packaging, we'll gladly assist you with the return process.
Your satisfaction is our commitment, and we're here to ensure your experience with us is nothing short of excellent. If you have any questions or need support, our dedicated team is always ready to help.
Welcome to the Victory family—where your trust and satisfaction are our highest priorities.
Lift Gate Needed
What Is a Lift Gate?
A lift gate for LTL freight deliveries is required for those without a forklift to remove the unit from the truck.
Please note: Liftgate is not an option for products 86" and larger due to carrier constraints. Must have forklift available for offloading or deliver to a dockside location.
No Lift Gate Needed?
If you have a forklift at destination, or we can deliver to a dockside location.
Our Free Shipping Promise
When we say FREE shipping – WE MEAN IT!
Victory Tractor Implements offers free shipping to your residence or farm anywhere within the continental US, including liftgate for offloading and delivery appointment setting.
Average time to delivery from time of order placement is 10 – 14 business days
If faster delivery or special accommodations are needed, please speak with one of our representatives at Victory Tractor who will be happy to assist.
Your Trust, Our Warranty: The Victory Assurance
At Victory Tractor Implements, we understand the importance of reliable equipment in your daily operations. That's why we're proud to back every product in our line with a solid 2-Year Warranty. This warranty reflects our confidence in the quality and durability of our equipment, promising you peace of mind with every purchase.
Our warranty is designed to ensure that your equipment remains a dependable partner in your farming, landscaping, and maintenance tasks. It covers any defects in material and workmanship, giving you the assurance that we stand firmly behind our products.
We are committed to your satisfaction and strive to make every experience with our equipment positive. While our warranty encompasses the core of what we offer, it is our dedication to quality and service that truly makes the difference. Should you ever need us, know that we're just a phone call away, ready to assist and ensure your equipment serves you well through every season.
Welcome to the Victory family—where your trust is our highest priority.
Very good service in terms of shipping. The flail mower is very rugged. Used about 10 hours so far. It looks like it will last a long time. As good or better than name brands at 1/3 the cost.
Just received my 64 Heavy Duty Flail mower.1. They answered the phone when I called, and answered my questions.2. Shipped free, with good tracking along the way.3. Arrived on the date they estimated, with very little assembly.4. Great price.They were not my first choice, but out of the three I was considering they were the only ones to answer the phone right away and walk me through some details. The whole transaction was seamless. Glad I found them. I will buy from them again.
We would definitely recommend. The hydraulic snow plow, that we ordered, arrived ahead of schedule and very well packaged. Very professional group and capable group. American know how on display.
Unit very well built shipped as quoted and crated well.I like the design with the gearbox outside of the mower as it keeps the shaft less acute when offset.spiral shaft is a plus in regard to staying in balance broke one grease zirk Brass? all in all very happy!!
Awesome experience! From the ordering process to the shipment, everything was as they said it would be. Setup was easy, only had one hiccup with infeed roller direction , called them and it was taken care of in literally 10 minutes. Great product, great service, great people!! Will buy from again in a heatbeat!!Jeff Sweeting,WWA Farm & Garden ServicesAlfred , ME 04002
Very happy with my new Victory flail mower. I had a couple of minor fitment issues but nothing an angle grinder and a drill couldn't fix. This mower is a beast weighing in over 1,000 lbs. Very heavy duty. I couldn't be happier especially when it was half the price of the name brands. The guys at Victory picked up the phone every time I called and were eager to answer my questions. Thanks Victory !
Adjusted the blade clearance after a few jams. No problems now. Heavy built and chips 4 inch no problem. Would probably handle the 5 inch. Very satisfied.
The EMID-70 embankment mower arrived in a metal cage on a wood pallet. The mower and accessories arrived in good condition.The assembly was easy and straightforward. After assembly, all bolts and connections were verified tight and the gearbox was filled with 80W90 oil and all fittings greased. Hooking up to the tractor was made easy using the two parking stands that come with the unit. Once attached to the three point hitch the hydraulic hoses were connected using the hoses and fittings supplied. Once the hydraulic system was filled and the air bleed out it was time to work. The mower was ran for about 10 hours in all positions from 90 degrees up to 30 degrees down with no problems. After mowing the field the mower was used to trim the limbs that were encroching on the field.Suggestions for the shipping cage are add a middle bar between the upper and lower part of the cage and use locking bolts on the assembly as a few were loose or missing. The mower and accessories had shifted and fallen out and came on a wood pallet added bt the freight company.
Product came in very quickly. For the price I expected much less quality. Instead the quality seems really good and it does a great job in grass or brush. Very happy with it.
I bought an EMSD-56 Embankment Flail Mower Standard Duty. I pre-ordered it in February. This had to be one of the most difficult years ever as China still had a zero covid policy. As soon as the mower was set to ship the port of Shanghai closed for over 2 months so delivery could not be made as agreed. I was offered a refund or an additional discount at that time. I opted for the additional discount. It took a while but finally the mower made it's way to me and it works fine. What I can say is that the team at this business is totally fair and extremely trustworthy. I would use them again for another implement.
Purchase of Flail mower was simple, arrived in good condition and assembly was straight forward. The only issue was it was set up for Cat 2 rather than Cat 1 but that was handled quickly with a new set of pins which were mailed to me and arrived within 3 days. Mower has been used only once to mow about 2 acres and worked well
Just bought the emid-64. No assembly instructions included but got it done. I have used it for about 2 hours now. Very nice unit, cuts great, heavy duty with grease fittings on all moving points. Smooth operation and comes with flow control so no jerky operation. Great so far... I did find that on the website has a full manual including assembly instructions..
I purchased the BX42S wood chipper. Shipping was quick and well crated. I've used it now for over 15hrs and it works perfectly! I cleared woods for a motorcycle track and now I use this to clean up and help loosen up the soil with the mulch it creates. Well worth it!
The BX42S wood chipper was received in early March. The unit was packaged in a heavy cage to help prevent shipping damage. After assembly I connected unit to my tractor and started using it. It has been able to handle any branches that I put into it up to about 4 1/2 inches. I would recommend this unit to anyone that needs a wood chipper.
Dealing with Ryan B. of Victory Tractor Implements was a pleasure. Everything Ryan said was truthful and correct. Shipment was a breeze Ryan supplied me with the tracking info and I was able to see where and when I would receive my chipper. Thanks again Frank
I bought the 56" embankment flail mower and couldn't be more satisfied. Works like a champ. Delivery was quick and assembly was easy. I would highly recommend this company and mower.
Prompt delivery…Awesome EMSD-56 flail mower, Awesome Support.. Since I never owned a flail mower, I had questions regarding what turned out to be normal operational sounds, etc. I was reluctant to call, but I must say the person that answered the phone was very knowledgeable of the product and treated me with the the utmost respect and kindness.Mower works great and far exceeds expectations!!Thank You Victory Tractor for an Awesome Experience!!!
My BX42S has exceeded my expectations. Hooked up to my Kubota 26hp tractor it chips 5 inch pine without any problem. 5 inch hardwood goes in my wood stove so I have not tried that. Communication with the company is excellent. Thanks Victory!
I just recently purchased the MDWC1500 wood chipper from Victory Tractor for cleaning up around the overgrown fields of our farm, arrived on time, setup was easy, very well built and rugged chipper! It has no problem chipping 3inch diameter brush. What a great investment for cleaning up around the farm! It did come with a damaged drive belt but a phone call to my local auto parts store and they had the belt in stock. For the price I highly recommend this machine to any small farm/homeowner
It is a pleasure working with the staff at Victory. We purchased an offset flail mower from them several years ago for mowing the berms of our rail-trail and it is holding up well and does a nice job We needed to replace a lost tooth on the mower and got the replacement parts quickly.
Excellent piece of equipment. Only problem, will not work with a John Deere quick connect.
After some initial setup issues I am very pleased with the chipper so far. The unit would not fit my Kubota BX2360 3 point hitch. The turnbuckles on the 3 point hit the chipper frame before the bottom pins lined up. I ended up buying a quick hitch and large pins (for $150) and that solved the issue. The chipper was well adjusted and worked fine from the start. Instructions on shortening the drive shaft could be better. The unit did not come with any kind of name plate or serial number. I would recommend it for hpmeowners.
At this point I’ve only used it enough to make sure everything works and the shoot knife was properly adjusted. Had a mods to make so I wouldn’t have to adjust my quick hitch between implements. Wasn’t real sure how well the BX42 would work on a JD1025 but so far it handled it. I like the skid style built in stand makes for a really solid design but also cuts down on ground clearance. That’s an issue for sub compact tractors. With the 3 point all the way up and the aid of the quick hitch it just cleared 12” and that’s enough to get through a small wash and up a hill with just a little bottoming out. The tall stand also keeps the drive shaft at a little more of an angle than I would like but would likely be great for a larger tractor. Another thing I liked but was worried about was the 4 knives. I have a lot of dead ash. It’s a pretty hard wood and wasn’t sure if the 4 knives would be too much contact for the small tractor. Worst case I was going to remove 2 knives. Wasn’t a problem with a couple of 4” dry ash branches I ran through it. So far all good, simple and solid piece of equipment.
The reason for only 4 stars; all the torque specs should’ve been met at the factory. The biggest problem is the only on line manual didn’t even have all the proper sizes listed. Like the ones for the knives and the bearings you know the only ones that matter and pretty much the only ones it has. All yeah both zerk fitting have flat spots on the side and just made a mess with very little grease getting to the bearings so I replaced them.
Overall this is a good machine. But I had to work through several issues to get it into production. Hence why I’m giving this 4, not 5 stars. First, the lower attachments for the 3 point hitch were loose, not properly torqued. Not a big deal, but annoying. Second, the fixed cutter was not properly adjusted to spec. When first placed into service, I had a LOT of jams. Fortunately, I found a comment in another review that led me to the fixed cutter adjustment as the problem. This should have been adjusted at the factory. But once done, the clogging problem was solved. Third, the flywheel cover didn’t fit properly – it was forced closed and took a pry bar and hammer to get open. Which I had to do quite often at the beginning to clear clogs (see previous comment). With some prying and hammering I was able to loosen it up some, but it is still very tight. I can live with it since now that the clog problem is mostly gone I don’t have to open it up very often. Lastly, a minor issue, there was some bending near the discharge rotator. Might have been from shipping, but since the machine comes in a steel cage, and I didn’t see any damage to the paint, I suspect it was bent at the factory. So my net assessment is that there are some quality control issues, but nothing that can’t be worked around. Once adjusted and in production, I have been quite happy with the capacity and performance.