Rated 5.00 out of 5 based on 2 customer ratings
(2 customer reviews)


WC8H Wood Chipper with Tractor independent Hydraulic Feeding System

Shipping always included ! Please check out Spare Parts available in the Spare Parts Section

Out of stock

SKU: WC4 Category:


Victory Tractor Implements WC8H Wood Chipper

 Our new & improved Wood Chipper has its own independent hydraulic feeding system and is suitable for your mid-sized tractors between 30 to 80 HP.

Our Wood Chipper with tractor independent hydraulic system is designed for professional wood processing and chips wood up to 6“ in diameter. It connects to your CAT I 3point hitch (bushings are included for your CAT II). 

The Victory WC8H uses its own hydraulic motors to pull the wood into the Chipper by two rollers. The hydraulic system clears wood jams by switching into “reverse” gear. The adjustable speed helps to apply the Chipper’s performance to wood type and size.

-) Even if your tractor doesn’t have a hydraulic system you can use the WC8H’s hydraulic system with its own oil tank (6 ½ Gal.).

-) Our WC8H is driven by a 4 belt system with a gear ratio of 2:1, which makes the blade rotor turn at twice the 540RPM of the PTO shaft speed. This produces smaller wood chips. (plus 1 belt for the hydraulics)

-) The large opening of the input hopper (8” x 12”) allows for larger branches with leaves to be fed into the chipper without causing jams. You control speed and volume with the safety handle.

Victory’s WC8H chippers comply with all safety regulations and are CE tested following the 2006/42/EC machine directives.

 The partially assembled machine does not contain any fluids or grease needed for operation! BEFORE USING THE MACHINE please consult the owner’s manual.

Technical Data WC8H

Dimensions 75” x 35” x 75”
Weight 1,025 lb. (465kg)
3-point hitch CAT I (CAT II bushings included)
Max. PTO shaft RPM 540
Rotor Speed RPM 1,000
Capacity of Oil Tank 6 ½ gal. (HLP 32/46)
Length of PTO Shaft 32 in. Drive System 4 + 1 belt system

Tractor Engine Power recommended 30 – 80 HP Power Range to max. performance 55 – 70 HP

Rotor diameter 24 in.
Rotor Width 10 in.
Rotor Weight 200 lb. (90 kg)

Number of knives 2 + 1
Hopper Opening 24” x 28”
Chipper Housing Opening 8” x 12”
Max. diameter of shredding material 6 in.
Feeding System Hydraulic forward / backward

Discharge height of hopper from ground 75 in. Discharge hopper turning angle 230 degrees

Housing material thickness 6 mm

Painting power coating (green/yellow)
Transport Crate (LxWxH) 45” x 38” x 47”

2 reviews for WC8H

  1. Rated 5 out of 5

    (verified owner)

    Ok so I just ordered one and will have more to follow but for now here is my experience. I contacted Victory with lots of questions, I was about to buy another machine from another company. Even though it was a weekend they answered all my questions quickly. The machine looks exactly like the larger name brand unit I was going to buy, it even had the same specifications. Victory was so helpful during my decision process I decided to go with them vs the big name brand. I also saved a bunch of money.
    The unit shipped quickly and arrived yesterday in a steel framed enclosure. This machine looks great and is a very heavy unit. I will post more info next week as I get time to assemble and run the unit.

  2. Rated 5 out of 5

    (verified owner)

    Ok so I’ve put a few hours on the machine. Assembly took about 4 hours. The machine works great, better than expected to be honest. The only draw back I have found is it’s not quick hitch compatible and you need a long top link to attach it properly. Not a huge deal but it is a bit of an inconvenience. Other than that it seems to be the same quality and HD construction of the bigger name chippers at a much lower price point. Very happy with my purchase.

Add a review

Your email address will not be published. Required fields are marked *

Have a Question? Submit it here!