MDWC1500 Motorized (Gas Powered) Disc Woodchipper
The MDWC1500 represents a significant advancement in wood chipping technology, replacing traditional drum chippers with a disc-based system that shreds wood up to 4 1/2 inches in diameter. Featuring a powerful 13.5 HP Briggs & Stratton gasoline engine and an innovative 360-degree rotatable discharge chute, it combines efficiency with convenience for top-tier performance.
Performance:
Equipped with a professional-grade Briggs & Stratton 13.5 HP engine, the MDWC1500 delivers robust power and reliability. Its centrifugal clutch and direct belt drive system power a 22-inch rotor disc at 2,000 RPM, pulling branches in at up to 50 feet per minute. This high-performance chipper is designed to efficiently handle materials up to 4 1/2″ in diameter, ensuring consistent and productive chipping operations.
Key Features:
➤ 4 1/2” maximum chipping capacity for a wide range of wood sizes
➤ 22″ x 3/4″ Rotor-Disc for efficient and reliable chipping
➤ 13.5 HP Briggs & Stratton Gasoline Engine, providing powerful and reliable operations
➤ Electric Start with battery included for easy operation
➤ Emergency Stop Lever and oil sensor for enhanced safety
➤ 360-degree rotatable Discharge Chute and 2″ Ball Trailer Hitch for convenient operation and transport
➤ Comes with LiFePO4 Battery and 16″ DOT Tire Size for mobility
Free Shipping
2 Years Warranty
Owner Review & Demonstration: Victory MDWC1500 4.5-inch 13.5 HP Gas Powered Wood Chipper/Shredder
The MDWC1500 is not only powerful but also designed for ease of use and maintenance. Its large disc rotor and infeed chute design allow for self-feeding operations, reducing the need for constant manual feeding. The machine’s balanced design ensures it can be easily moved by hand or transported using an ATV or utility vehicle, making it highly versatile for various worksites.
Safety Features:
➤ Emergency Stop Lever to quickly disengage operation
➤ Safety decals and guards in place to protect the operator
➤ Engine with oil sensor to prevent running without adequate lubrication
Safety considerations are integral to the design of the MDWC1500, featuring an Emergency Stop Lever and an engine equipped with an oil sensor. These features, along with safety decals and guards, ensure the operator’s well-being during chipper operations.
ATTENTION: Machines are delivered partially assembled and without operational fluids. It’s imperative to read the user manual thoroughly before operation to ensure safe and efficient use of the woodchipper.
With its advanced features and design, the MDWC1500 Motorized Disc Woodchipper sets a new standard for wood chipping efficiency and safety, making it an essential tool for anyone needing to manage wood debris effectively.
MDWC-1500 Gas Powered Wood Chipper Product Specifications
| Technical Data | MDWC-1500 |
|---|---|
| Infeed Opening | 5” x 5” |
| Max. Throughput Capacity | 5 in. |
| Variable Infeed Speed | n/a |
| Flywheel Speed | 2400 RPM |
| Rotor (Flywheel) Diameter | 22 in. |
| Rotor (Flywheel) Weight | 120 lb. |
| Machine (gross) Weight | 595 lb. |
| Number of Knives | 2 + 1 |
| Infeed Chute Opening | 20” x 26” |
| Hydraulic Pump & Tank | n/a |
| Hydraulic Infeed System | n/a |
| Safety Stop Bar | Included |
| Variable Speed Control | n/a |
| Discharge Chute Rotation | 270 Degrees |
| Flywheel Housing Material | 6 mm |
| Paint | Powder Coat |
| Colors (Body/Chute) | Green/Yellow |
| Crate Dimensions | 50”x42”x31” |
| Shipping Weight | 695 lb. |
Frequently Bought Together…
You May Also Like…
- Sale!
BX42S Self Feeding PTO Wood Chipper
Min 18 PTO HP
CAT I
5" Chipping CapacityIn stock
$1,695.75 Read More - Sale!
BX52 Self Feeding PTO Wood Chipper
Min 18 PTO HP
CAT I
5" Chipping CapacityIn stock
$1,950.75 Read More - Sale!
BX510H Wood Chipper with Hydraulic Infeed System
Min 18 PTO HP
CAT I
5" Chipping CapacityIn stock
$2,375.75 Read More - Sale!
MDWC1500 Motorized (Gas Powered) Woodchipper
In stock
$1,950.75 Read More -
WC-10H PTO Wood Chipper with Self Contained Hydraulics
Min 50 PTO HP
CAT II
10" Chipping CapacityAvailable Spring 2025
$4,495.00 Read More - Sale!
WC-8H Hydraulic Wood Chipper with Self Contained Motor
Min 25 PTO HP
CAT I
8" Chipping CapacityIn stock
$2,715.75 Read More -
MDWC-2500 Hydraulic Wood Chipper (Gas Powered)
Available Spring 2025
$7,995.00 Read More
Proud supporters of the FFA
David Bohren –
Excellent Value. Easy to maneuver. Suggest adding an hour meter ($10-15; 10-15 minutes to install) to be able to track maintenance points! Pay attention to initial belt adjustment! Tows well.
Roy Morris –
This chipper is great I bought this for cleaning up brush around our 6 acre property and it works GREAT , it will take5 inch diameter oak trees without hesitation . This is a very well built machine , simple design, highly recommend this for anyone cleaning up ther property
David M Linam –
The chipper is good quality and works as described. I made one call to Victory Implement and Ryan was very helpful. Chipper arrived in a timely manner and there were no problems with shipping, etc… I would recommend Victory Implement to anyone.
Jonathan –
More than pleased! I’ve owned several large homeowner sized chippers which did ok but never really felt up to the task of maintaining three wooded acres in the Pacific Northwest. I would be exhausted after chipping even a small pile of limbs. I would wear myself out struggling to get the right angle on a long limb and dealing with the inevitable clogs and jams was just tedious. Unfortunately, there just seems to be a gap between the homeowner size (3”) and a commercial sized (6”+) chippers leaving property owners with little options in the 4” to 5” category. This chipper is perfect for the property owner or landscaper that needs more than the $1000 big box special but is not willing to spend or store a $20,000 6” Vermeer behemoth. It self feeds beautifully and the large fan blades on the disc exhausts soft materials, such as leaves and needles, effortlessly. The design that allows easy access to the hopper is just brilliant and it is well the balanced for easy towing and maneuvering. Not too big and not too small. As a plus it has an electric start that saves your back before you even start and all for $2,000 bucks. It arrived in about a week after ordering on a large box truck. Well packed in wooden crate and in bubble wrap, though some of the parts did rub in transport and were missing paint…but it’s a tool and not a show car. I found if you put the tongue on first you can tip the chipper on its back to assemble the wheels. Having an extra set of hands is super helpful. Took me just under three hours to get it all together. Trust me, if you dread rolling out your 8hp craftsman after a winter storm your back and shoulders will thank you, it’s the best 2 grand I have spent.
Jack Speyer –
This chipper does everything it is advertised to do. My ranch hands put it together with no problems and we put a pile through that was 12 feet high and 100 feet round, the chipper ground it all up. We put up to 3 inch pieces through. We had to go a little slower with the larger pieces, but it still did the job. You have to cut any Y pieces as the feed chute is not overly large, but they go through fine. We used 3 foot sticks as pushers for the small stuff that would go in easily. The chips are bigger and rougher that I am used to, so we can’t use for the horse stalls, but they are still small enough to spread around. I would but it again.
Garrett G. –
After a lot of research and comparison I decided to buy this chipper. I liked how it was designed and the use of a weighted disc rather than drum.
The unit arrived on the estimated delivery date, crate was in good shape. On opening the crate I did notice some loss of paint on some of the surfaces due from parts rubbing against each other from poor packaging. I contacted Ryan at Victory and he quickly followed up with some touch up paint. The chipper went together fairly well but I think I would re-order some of the steps to make it a one person job. No missing parts, bolts or nuts. You will need to set the bed knife gap and grease the two main bearings before use.
What I am very pleased with is how well the chipper works. We heat with wood and I burn everything 2” and larger. Most of my chipping so far has been generally branches 2” and smaller. The chipper just eats this stuff up. I have fed some larger 3” – 4” material through as a test. It chips this too but just takes longer.
Agin, very happy so far with my purchase. Victory was very good to work with and recommend you contact Ryan if you are thinking about purchasing.
Will –
Working with tech support prior to the order was helpful and encouraging. Shipping was prompt, Assembly was straightforward. Easy to use, engine is matched well for the power demand, exhaust chute is very efficient and overall speed and performance is good. I would recommend this chipper, it’s a good value.
Ryan Getchell (verified owner) –
This chipper is awsome! We bought this for cleaning up brush around our 30 acre farm property and it works GREAT , it will take 3 inch diameter brush no problem. This is a very rugged , well built chipper , simple design, easy to work on…highly reccomend this for any homeowner/ hobby farm
L Shore –
As a retired quality control engineer would like to commend you for a very nice product.
The design is simple, functional, durable and is priced below other similar products. I have chipped two piles of dry maple and green oak limbs and the machine spit out very nice mulch with no real problems. Small pieces may have to be pushed with a forked stick but this is to be expected without a mechanical feed option. Only warning is this machine weighs about 570 lbs so be prepared when you receive it and assemble it. I inserted the tongue first to give better leverage and used a car jack to lift the unit for wheel mounting. Once again I am very pleased with the unit.