Description
EMID-64 Embankment Flail Mower with Spiral Rotor Shaft, 40-65HP
Intermediate sized Verge Mower for Mid-Sized Tractors with 40HP to 65HP, CAT I 3-Point Hitch.
Victory Tractor Implements EMID Flail Mowers comply with all safety regulations and are CE tested following the 2006/42/EC machine directive.
➤ EMID64 for Mid-Sized Tractors with CAT I 3 Point Hitch,
➤ Hydraulic extension arm has up 98″ reach,
➤ Vertical rotation from -55 degrees up to +90 degrees,
➤ cuts heights up to 3′ and up to 1 1/4″ thickness,
➤ Spiral Rotor Shaft, Hinged Rear Gate, replaceable counter blades.
PTO shaft included Free Shipping 2 Years Warranty
Our VTI-EMID verge mower series was designed to ideally match your Mid-Sized Tractors between 40 to 65 HP. These verge mowers offer great flexibility with their range in horizontal movement as well as vertical rotation. They are perfect to maintain your fields, orchards, vineyards, or horse properties as well as hedges and trees. With a horizontal extension of up to 98″ and a rotation from -55 degrees up to plus 90 degrees, our EMID mowers will make that perfect match for your tractor so your job gets done easily.
We use 20 forged steel flail hammers on the EMID-64 – each weighing 800 grams which ensures a perfect cutting result. The hinged Reargate allows maximum access for maintenance and cleaning.
The standard free-wheel gearbox lets the rotor shaft turn, once the PTO is switched off so that its movement will not be transferred to the tractor. The mower´s front is equipped with safety flaps to prevent debris and stones from being thrown out of the machine.
All EMID mowers have easily accessible stainless steel grease nipples for service and height-adjustable skids. The PTO shaft is part of the accessory for all our mowers. The short and easy service plan in the user manual helps you with maintenance and service.
The completely assembled machine is delivered in a steel crate. Just the Cat-I 3-point hitch, the hydraulic arms, and the PTO shaft protector have to be assembled, taking you less than 60min. We offer an assembly guide with photos to assist you.
Bearings
Like all our mowers, the EMID series has an electronically balanced spiral rotor shaft which is driven by 4 belts, with 17mm width each. The free-wheel gearbox runs in an oil bath. The gearbox has to be filled with oil before you first use the machine (SAE 80/95).
Underneath the 6mm steel housing sits the laser balanced spiral rotor shaft with 20 hammer-shaped flails, each with a weight of 800gr. The forged steel flails can be individually exchanged. The bearings of the rotor shaft are sitting in CNC milled bearing seats which significantly increases their durability. Powered by the PTO shaft via the gearbox, the rotor shaft turns with 2200 rpm and cuts the material down to a minimum, so vegetation decomposes easily. The heavy rear roller guarantees smooth performance even over rough surfaces.
ATTENTION
Partially assembled machines do not contain any fuel, oil or other fluids or grease needed for operation! BEFORE USING THE MACHINE please carefully read the user manual.
Call Victory Tractor at (562) 534-8182 to place your order today!
Frequently Bought Together…
You May Also Like…
Proud supporters of the FFA
Eric –
Like other reviews here, this Flail mower is a well built, solid, Heavy Duty piece of equipment. I had a small issue, corrected it myself, but the customer service during the pre purchase and post purchase is stellar!
Highly recommend this dealer and this brand!
Vernon Collins –
Better than expected good heavy built machine. Clean up about acre of grownup field mostly weeds and bushes. Have plenty more to do and rougher.I know it won’t be a problem for this machine .Well satisfied
Ron Oberbeck –
I received this very nice unit this week. I like the heavy duty construction. It was very easy to put together. I have used for 5 hours and I am very pleased with the smooth operation. It is very quiet as well. The finish it leaves is great.I have a lot of banks,ponds,and fence rows. It was easy to manage in all situations. Rose bushes and saplings were no challenge and there was absolutely nothing left of them with one pass!
Ryan Talsma –
Just bought the emid-64. No assembly instructions included but got it done. I have used it for about 2 hours now. Very nice unit, cuts great, heavy duty with grease fittings on all moving points. Smooth operation and comes with flow control so no jerky operation. Great so far.
.. I did find that on the website has a full manual including assembly instructions..
John Damron –
Very well made machine from what I can tell so far. Only problem was finding details on assembly but was able to figure it out. Very friendly people to deal with and shipping time was reasonable.