BXH-5×7 Wood Chipper with independent Hydraulic Controls
Product Cost: $
Import Tax: $
Total cost: $3,295.00
BXH-5×7 Wood Chipper with Tractor independent Hydraulic Feeding System, 25 – 55 HP
Shipping always included! Please check out Spare Parts available in the Spare Parts Section
Out of stock
Our New & Improved BXH-5×7 Wood Chipper from Victory Tractor Implements
Victory’s BXH-5×7 has a tractor independent hydraulic feeding system and is suitable for your mid-sized tractors between 25 to 55 HP, utilizing your CAT I or CAT II 3 Point Hitch
This machine with tractor independent hydraulic system is designed for professional wood processing and chips wood up to 5“ in diameter.
The Victory BXH-5×7 uses its hydraulic motors to pull the wood into the Chipper by two rollers. The hydraulic system clears wood jams by switching into “reverse” gear. The adjustable speed helps to apply the Chipper’s performance to wood type and size.
-) The BXH-5×7 is driven by a 4 belt system with a gear ratio of 2:1, which makes the blade rotor turn at twice the 540RPM of the PTO shaft speed. This produces smaller wood chips. (plus 1 belt for the hydraulics)
-) The large opening of the input chute (30” x 42”) allows for larger branches with leaves to be fed into the chipper without causing jams. You control speed and volume with the safety handle.
Victory’s BXH-5×7 chippers comply with all safety regulations and are CE tested following the 2006/42/EC machine directives.
The partially assembled machine does not contain any fluids or grease needed for operation! BEFORE USING THE MACHINE please consult the owner’s manual.
Technical Data WC8H
Dimensions 75” x 35” x 75”
Weight 1,025 lb. (465kg)
3-point hitch CAT I (CAT II bushings included)
Max. PTO shaft RPM 540
Rotor Speed RPM 1,000
Capacity of Oil Tank 6 ½ gal. (HLP 32/46)
Length of PTO Shaft 32 in. Drive System 4 + 1 belt system
Tractor Engine Power recommended 30 – 80 HP Power Range to max. performance 55 – 70 HP
Rotor diameter 24 in.
Rotor Width 10 in.
Rotor Weight 200 lb. (90 kg)
Number of knives 2 + 1
Hopper Opening 24” x 28”
Chipper Housing Opening 8” x 12”
Max. diameter of shredding material 6 in.
Feeding System Hydraulic forward / backward
Discharge height of hopper from ground 75 in. Discharge hopper turning angle 230 degrees
Housing material thickness 6 mm
Painting power coating (green/yellow)
Transport Crate (LxWxH) 45” x 38” x 47”