BCRI-180 Heavy Duty Ditch Flail Mower
Tractor Power Recommended: 50HP – 80HP, CAT II 3-Point Hitch, Weight of Mower 1,350 lb., Weight of Flails 1,300 grams each, 16 flails, 4 belts !
4 in stock (can be backordered)
- Technical Description
- Reviews (0)
- User's Manual
- Question & Answer
- Additional information
Victory’s new True Heavy Duty Embankment (Ditch) Flail Mowers
BCRI-180, 70″ Mowing Width, 50-80 HP
Our BCRI-Series of Heavy Duty Ditch Flail Mowers are ideal for ditches, embankments, hedges and other uneven terrains.
The BCRI-180 with its hydraulic swivel arm has been designed to fit your tractor with an engine size of 50 to 80 HP and connects to your CAT II 3-point hitch. Extra heavy flails (1,300 gr.)
The BCRI Ditch Flail Mower series is equipped with an extremely powerful transmission maximizes the performance of the mower when matched to the proper tractor size.
The hydraulic swivel arm allows for maximum flexibility and a mowing range angle from -60 degrees to +90 degrees. The maximum distance from the center line of your tractor to the right side of the mower is 118” (model 180).
When matched to the right tractor size our BCRI mowers are able to handle almost any vegetation while still offering high working efficiency.
The hydraulic swivel arm allows mowing in almost any position. It also saves maneuvering in narrow corners when used as a regular flail mower. Your tractor needs 2 double acting hydraulic control circuits in order to fully operate the swivel arm.
Our BCRI Ditch flail Mowers have a mechanical crash protection system which lets the mower swing out to the back (release), in case it hits an obstacle. This release feature provides the tractor driver the opportunity to break before damage is done to the mower. The safety feature is totally maintenance free.
The BCRI-180 mower uses 16 large forged steel galvanized high- performance flails (hammers). Each flail weighs 1,300 grams (2.8 pounds U.S.), ensuring a perfect mowing result on grass & undergrowth, as well as bushes & hedges.
The mowing height is adjusted at the heavy self-cleaning rear roller to prevent the mower from cutting into the ground on bumpy surfaces.
The professional free-wheel transmission lets the knives shaft turn once the PTO is switched off so that its movement will not be transferred to the tractor. The mower’s front is equipped with safety flaps to prevent debris and stones being thrown out of the machine.
All BCRI-mowers have easily accessible grease nipples for service and height adjustable skids and support legs for storage. The 70” long PTO shaft is included with all of our BCRI verge mowers. The short and easy service plan in the user manual helps with your maintenance.
Victory’s belt system guarantees an almost 100% power transfer rate without belt problems. The heavy-duty gearbox runs in an oil bath. The transmission oil comes with the machine. However, please check the level before operating the machine initially.
Victory’s BCRI embankment/verge flail mowers comply with all safety regulations and are CE tested following the 2006/42/EC machine directive.
Partially assembled machines do not contain any fuel, oil or other fluids or grease needed for operation! BEFORE USING THE MACHINE please carefully read the user manual.
|Tractor Power Recom’||40 – 60 HP||45 – 70 HP||50 – 80 HP|
|Working Width||55 inches||62 inches||70 inches|
|Total Weight||1,150 lb.||1,292 lb.||1,350 lb.|
|3-Point Hitch||CAT II||CAT II||CAT II|
|PTO Shaft Length||70 in.||70 in.||70 in.|
|PTO Speed||540 RPM||540 RPM||540 RPM|
|Drive System||4 Belts||4 Belts||4 Belts|
|Flail Shaft Speed||2,150 RPM||2,150 RPM||2,150 RPM|
|Nbr. Of Flails||12||14||16|
|Flails (forged steel)||1,300 grams||1,300 grams||1,300 grams|
|Working Efficiency||250 cu.ft./Hr.||350 cu.ft./Hr.||450 cu.ft./Hr.|
|Dim’s.(WxHxD)||66x56x30 in.||74x56x30 in.||82x56x30 in.|
|Material Top Housing||4 mm||4 mm||4 mm|
|Side Walls||6 mm||6 mm||6 mm|
|Paint (Grey)||Powder Coat.||Powder Coat.||Powder Coat.|
|Shipping Box(LxHxW)||80x45x37 in.||88x45x37 in.||96x45x37 in.|
|Behind the Tractor||76 in.||76 in.||76 in.|
|From mid’ of Tractor||102 in.||110 in.||118 in.|
|Vertical Extension||75 in.||75 in.||75 in.|
|Length of hydraulic hoses (inches)||70/80/120/130||70/80/120/130||70/80/120/130|
|Slope of mowing Angle||-60 to 90 deg.||-60 to 90 deg.||-60 to 90 deg.|
Have a Question? Submit it here!
|Dimensions||96 x 45 x 37 cm|